Capabilities

Standard concrete mixes from 15 MPa to over 35MPa with air entrainment and plasticizer

These are your typical concrete mixes used for basement floors, garage floors, driveways, walkways, patios, porches, footings, walls and any other traditional concrete needs. Each application requires a different concrete strength.

 

Exposed Aggregate

We have a beautiful multicolored pea stone aggregate we put in the concrete that allows the finisher to peel away the top layer of cement and expose the pea stone. Exposed aggregate is used mostly for driveways, walkways, patios and pool sides. Exposed aggregate techniques can also be used on vertical surfaces such as decorative walls and sound barriers.

 

Solomon Color Card

Colour

Ensuring that our customers have the best tools necessary to satisfy their customer’s needs Brant Concrete’s Solomon Colours CF Color Flo Liquid Colour CP machine provides unparalleled consistency, accuracy, dependability and customized colours to provide lasting beauty to any coloured concrete project. Download the Solomon Color Card Here.

 

Fiber Mesh Reinforcement

Fiber mesh is very fine pieces of nylon that are added to the concrete mix. Fiber mesh creates a better surface bond. It reduces the formation of plastic shrinkage cracks in concrete. Fiber mesh is a multi-dimensional reinforcement that improves impact, shatter and abrasion resistance of concrete. It enhances durability and toughness. Fiber mesh should not be used to replace wire mesh.

 

Calcium/Accelerator

A non corrosive accelerator can be added to your concrete mix. The addition of cement accelerator speeds the setting time of the concrete; thus curing time starts earlier. This product will give your concrete increased early and ultimate strengths. This allows concrete to be placed in winter without the worry of frost damage.

 

Flowable Fill/Unshrinkable Fill

Is a mixture of aggregates, cementing material and water, with or without chemical admixtures, that hardens into a material with higher strength than soil but less than 0.4 Mpa compressive strength at 28 days that can be removed with hand tools.

Unshrinkable fill is used for:

  • Backfill: Sewer trenches, utility trenches, bridge abutments, conduit encasements, pile excavations, retaining walls, and road cuts.
  • Structural Fill: Foundation sub base, subfooting, floor slab base, pavement base, and conduit bedding.
  • Other Uses: To fill in abandoned mines, underground storage tanks, wells, tunnels, sewers, basements, voids under pavement, and erosion control.

 

Admixtures

Super Plastizers (HRWR)

Winterset

Mid-Range Water Reducer (MRWR)

 

Grout/Dry Pack

Grout and dry pack is a concrete mixture containing only fine aggregates (sand), cement and water(chemical additives may be added). dry pack is a very dry mix used to level floors prior to tiling. Grout is similar to dry pack but contains more water and is commonly used for pool bottoms.

 

Concrete Retaining Wall Blocks

We manufacture decorative concrete retaining wall blocks. They can be used to make corners, concave and convex walls. These blocks come in two sizes 2’ x 2’ x 2’ and 2’ x 2’ x 2’.

The wall blocks come in a plain white block look or the decorative mold that is perfect for any landscape project.